產品加工視頻
XKC-Z15 drilling and milling center has drilling, rigid tapping, small margin precision milling function.
It is mainly used for processing copper, aluminum and other non-ferrous metals and high precision steel parts. It is a high-speed and efficient drilling and attacking machine. It is equipped with 8 or 15 station tool magazine and high-speed automatic tool changer. Multiple XKC-Z15 drilling and attack center combination and manipulator combination can form an efficient automatic production line.
Optional Accessories
4 Inch flat nose pliers |
Clamping kit |
BT15 shank, chuck, pull nail |
4th axis rotary table (Japan) |
Mastercam post processing program (Tan Xing, Taiwan) |
Fifteen bit knife library |
Machine Specifications
Distance to go | X axis movement | 260mm |
Y axis movement | 185mm | |
Z axis movement (top and bottom of spindle head) | 250mm | |
Distance from the top of the worktable to the end of the spindle | 120-370mm | |
Distance between the center of the spindle and the Z axis guide surface | 216.5mm | |
Table | Working ares | 450*200mm |
Maximum load-bearing quality of worktable | 70kg | |
Positioning T-groove | 10H7 | |
T groove spacing | 63mm | |
Principal axis | Spindle speed | 60～10000rpm/min |
Rated speed | 3000rpm/min | |
Constant power range | 8000rpm/min | |
Maximum speed | 10000rpm/min | |
Taper of spindle / pull nail | BT15/15PB | |
Inner diameter of spindle bearing | ?25mm | |
Translational speed | X, the fastest moving speed of the Y axis | 40000mm/min |
Z axis speed | 32000mm/min | |
Cutting feed rate | 5～10000mm/min | |
Manual moving speed | 50～4000mm/min | |
Eight position tool store | Tool capacity (maximum) | 8（9） |
Maximum tool diameter | ?30mm | |
Clamping tool diameter | ?1.0～?6.0mm | |
Maximum tool length | 100mm | |
Maximum mass of tools | 0.4kg | |
Total tool quality | 3kg | |
To choose a tool | Random shortest path | |
Switching time of adjacent cutters | 0.8sec | |
Farthest tool switching time | 1.6sec | |
Rated output | Rated power for continuous operation of spindle | 0.55kw |
Rated power of spindle for 30 minutes | 1.1kw | |
Rated torque for continuous operation of spindle | 1.75Nm | |
X, Y shaft feed rated power | 0.75kw | |
Z axis feed rated power | 1.0kw | |
X, Y shaft feed rated torque | 2Nm | |
Z shaft feed rated torque | 4Nm | |
Demand power | Supply voltage variation | ±10%V |
Power frequency variation | 50/60±1Hz | |
Electric capacity | Continuous rated capacity | 5.0KVA |
Rated capacity for 30 minutes | 5.3KVA | |
Momentary output | 26KVA | |
Compressed air supply | Pressure | 0.4～0.6Mpa |
Rate of flow | 70L/min | |
Shape of machine tool | Length of front and rear of machine tool (open of electric cabinet door) | 2364mm |
Left and right width of machine tool | 1060mm | |
Height of machine | 2190mm | |
Weight of Machine | 1300kg | |
Precision | Positioning accuracy（X、Y、Z） | 0.005mm |
Reverse differential value（X、Y、Z） | 0.004mm | |
Repetitive positioning accuracy (X, Y, Z) | 0.002mm | |
Noise | Equivalent noise (1 meters in front of machine tool, 1.2 meters in bed distance): 2A11, GB/T3190 S:5000min-1 F：2000mm/min D:1mm W：8mm | 78dB |
Tool | Taper shank form | JBS4002-15T |
Ball screw | X axis (Diameter * Pitch) | 15*10mm |
Y axis (Diameter * Pitch) | 15*10mm | |
Z axis (Diameter * Pitch) | 20*8mm |
Standard Specification for CNC device
CNC control system | FANUC Oi MD | FANUC Oi-Mate MD |
Controlled | At the same time, the 3 axis, the manual 1 axis | |
Input mode | MDI type absolute value / increment value at the same time and use | |
Program storage capacity | 514K | |
Number of logon programs | 400個 | |
Interpolation function | Positioning, unidirectional positioning, accurate stop, tapping, cutting, straight line, arc, spiral interpolation | Location, accurate stop, tapping, cutting, straight line, arc, spiral interpolation |
Least input increment | 0.0001mm/min | |
Minimum instruction unit | 0.0001mm/min | |
Cutting feed rate | 1～10000mm/min | |
Rapid traverse | X:40000mm/min Y:40000mm/min Z:32000mm/min | |
Tool magazine capacity | 8+1/15+1 | |
Tool compensation number | 400個 | |
Miscellaneous function | M/S/T | |
Dead time | 0～99999.999秒 | |
Feed rate override | 0～150% | |
Rapid traverse override | F0、F25、F50、F100 | |
Inputoutput interface | RS232 | |
Display language | Chinese, English | |
Communication function | Embedded Ethernet | |
